tools for an air conditioner service

Tips for Cleaning Your AC System in Hattiesburg

With summer ending in Hattiesburg, now is a great time to get ahead on air conditioner maintenance.

If you haven’t cleaned it lately, it could be blocked with dust and yard waste. This buildup can decrease your unit’s efficiency and cause it to stop working. Or make it wear out faster.

We advise having your air conditioning system professionally maintained once a year. Why? A clean unit can be more energy efficient, which could save you money on energy costs.

Regular AC maintenance also helps our technicians spot and take care of small issues before they turn into costly problems.

Related: How to Keep Your Air Conditioner from Failing

Some of the work we do consists of:

  • Inspecting the blower, motor, drain line and coils
  • Watching pressure and temperature
  • Examining lines, refrigerant levels and connections

You can still have a tune-up done this fall—and we can get your furnace prepped for heating season too.

Schedule maintenance now


There’s also some upkeep you can do alone between professional tune-ups. You just need about an hour to clean your outdoor condenser unit, as well as a few components on your indoor HVAC system.

Related: How Often Should You Expect to Get Air Conditioning Service Done?

How to Clean Your Outside AC Unit

Pick a warm day to scrub your air conditioner. At least 60 degrees Fahrenheit (20 degrees Celsius) is best. That way, you can run the unit once you’ve cleaned it.

You’ll only need a handful of tools:

  • Wet-dry vacuum and hose with a soft brush attachment
  • Screwdriver
  • Butter knife
  • Damp rag
  • Small, round paintbrush
  • Replacement furnace filter (if necessary)

Related: How AC Repair and Maintenance Can Actually Save You Money

5 Steps to Clean the Outside Unit

1. Turn Off the Power

Switch off the power to your air conditioner at the breaker box.

2. Clean the Outside

Empty rubbish from the unit. This includes branches, bushes, weeds and grass.

Then turn on the vacuum to gently clean the metallic fins. These pieces are also referred to as condenser coils and divert heat away from your equipment.

You need to be cautious with these delicate coils. Bent or crinkled fins can impact efficiency.

3. Fix Bent Fins

Use a butter knife to rearrange bent fins. You can also use a fin comb from an appliance parts store. A pro from Oak Grove Heating & Air Conditioning should fix extensive damage.

4. Clean the Inside

After removing the fan, dig out leaves and other yard litter. Then clean the inside of the equipment with a wet rag.

The only coil cleaner you need is water. Use slight pressure from a hose nozzle to rinse the fins, spraying water from the inside out. Put the fan back in once you’re completed.

5. Test Your Air Conditioner

It’s safe to restore power and turn your air conditioner back on. If it’s not working properly, reach out to us a call at 601-292-9763.

Related: Air Conditioner Service: Pay a Little Now, Save Later

3 Steps to Clean the Indoor Unit

1. Turn Off the Power

Turn off the electricity to your furnace at the breaker box.

2. Check Your Filter

Furnace filters should be replaced every several months, depending on the model you use.

Can’t remember when you last put in a new one? Remove it and hold it up to the light. If light isn’t visible, replace it.

3. Clean the Inside

Remove the blower door and vacuum up dust.

Then take a look at your air conditioner’s drain line—it’s a supple plastic tube. If it’s dirty, you can freshen it by draining thinned bleach through the tube to flush the line. Or you can get a new tube.

Wash the drain port using a small, round paintbrush. Connect the drain tube and turn the power back on.

Related: How to Keep Your Air Conditioner Running Well Through Fall

Never Forget a Tune-Up Again

Annual air conditioner maintenance from Oak Grove Heating & Air Conditioning can make your equipment more efficient and help it last longer. We also provide practical service agreements, so you won’t forget to schedule your annual maintenance!

Back To Blog